Ply – Bracing, Structural & Flooring

Ply Bracing

Plywood Bracing is an imported hardwood product which is made especially for the structural bracing of houses. It is made with an ‘A’  bond glue line. The standard plywood bracing solution provides a simple yet safe method of designing wind bracing to suit a large proportion of low rise timber framed structures in Australia. This solution is the method used in Australian Standard AS1684 National Timber Framing Code.

Designed for use in the following applications;

  • Wall bracing
  • Roof bracing
  • Sub floors

    • Available in sheet sizes of:

    2440x900, 2440x1200, 2745x900, 2745x1200, 3050x900 & 3050x1200

    Structural Ply

    Structural Plywood is manufactured to AS/NZS 2269 from softwood veneers. It is available in grades based on face and back veneer quality from A to D, with a minimum F8 stress grade. Structural Plywood is a very stable and workable type of plywood, with numerous applications for the building, shop fitting and cabinet making industries. The most common grades of structural plywood available are CD and DD.

    Suitable for;

  • Cabinetry
  • Furniture
  • Building
  • Roofing
  • Bins
  • Boxes
  • Crates
  • Hoardings
  • Bracing
  • Walls

    • Available in 2400x1200 sheets in the following thicknesses:

    7mm, 9mm, 12mm, 15mm, 17mm, 19mm, 21mm & 25mm.

    Plywood Flooring

    Tongue and Groove Plywood is strong and durable, with a pre-sanded C-grade face panel available in a range of thicknesses suitable for use in structural and non-structural flooring.  It has a machined groove along its edges, with a single plastic tongue to form a tongue and groove joint between sheets.

    Specifically designed for use as:

  • Flooring

    • Available in the following sheet sizes and thicknesses:

    2400x1200

    12mm, 15mm, 17mm, 19mm, 21mm & 25mm.

    2700x1200

    15mm, 17mm & 19mm.